Temel Varol profile image
Temel Varol Assoc. Prof. Dr. KARADENİZ TEKNİK ÜNİVERSİTESİ
Publication 14 Review 12 CrossRef Cited 10
14 Publication
12 Review
10 CrossRef Cited

Research Fields

Materials Science and Technologies

Institution

KARADENİZ TEKNİK ÜNİVERSİTESİ

Publications

Surface improvement of 42CrMo4 low alloy steel via nitrocarburization and electroless Ni-P plating: enhancing the surface hardness
Authors: Uğur Temel Yıldız , Temel Varol , Burak Berk Day , Büşra Kandemir , Furkan Alptekin , Ahmet Fuat Günaçar
Published: 2024 , The International Journal of Materials and Engineering Technology
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 292

0

292

A Review on the Surface Treatments Used to Create Wear and Corrosion Resistant Steel Surfaces
Authors: Uğur Temel Yıldız , Temel Varol , Gençağa Pürçek , Serhatcan Berk Akçay
Published: 2024 , Journal of Polytechnic
DOI: 10.2339/politeknik.1001951
FAVORITE 0 TOTAL DOWNLOAD COUNT 1722

0

1722

ELECTRODEPOSITION OF HARD CHROMIUM ON THE INTERIOR SURFACE OF INFANTRY RIFLE BARRELS: AN EXPERIMENTAL INVESTIGATION
Authors: Uğur Temel Yıldız , Temel Varol , Serhatcan Berk Akçay , Gençağa Pürçek
Published: 2023 , The International Journal of Materials and Engineering Technology
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 297

0

297

Selection of natural reinforcement material with multi-criteria decision-making methods for polymer composite materials developed for gun bodies
Authors: Yaşam Kandemir , Temel Varol , Mustafa Aslan
Published: 2023 , Gümüşhane University Journal of Science and Technology
DOI: 10.17714/gumusfenbil.1215620
FAVORITE 0 TOTAL DOWNLOAD COUNT 779

0

779

Intuitionistic Fuzzy Decision-Making Methodology for Barrel Material Selection
Authors: Yaşam Kandemir , Temel Varol , Uğur Temel Yıldız
Published: 2023 , The Black Sea Journal of Sciences
DOI: 10.31466/kfbd.1249322
FAVORITE 0 TOTAL DOWNLOAD COUNT 416

0

416

Production of Al-Cu-Mg Alloys Reinforced with High Al2O3 Ratios by Hot-Pressing Method
Authors: Serhatcan Berk Akçay , Temel Varol , Hüseyin Can Aksa , Onur Güler
Published: 2023 , Duzce University Journal of Science and Technology
DOI: 10.29130/dubited.1019419
FAVORITE 0 TOTAL DOWNLOAD COUNT 544

0

544

Selection of the Most Appropriate Reinforcement Material for Aluminum Matrix Composites by AHP Method
Authors: Temel Varol , Yaşam Kandemir
Published: 2022 , The Black Sea Journal of Sciences
DOI: 10.31466/kfbd.1177161
FAVORITE 0 TOTAL DOWNLOAD COUNT 940

0

940

The Effect of Mechanical Alloying Time on the Hardness and Electrical Conductivity Properties of Cu-Cr Alloys Produced by Hot Pressing Method
Authors: Hamza Çolak , Serhatcan Berk Akçay , Temel Varol , Onur Güler , Hüseyin Can Aksa
Published: 2022 , Karaelmas Science and Engineering Journal
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 760

0

760

Effect of Boron Carbide Reinforcement Amount on the Properties of Boron Carbide Reinforced Al Based Composites
Authors: Serhatcan Berk Akçay , Temel Varol , Onur Güler , Hüseyin Can Aksa
Published: 2022 , El-Cezeri
DOI: 10.31202/ecjse.1023910
FAVORITE 0 TOTAL DOWNLOAD COUNT 867

0

867

Production and Characterization of Al2024/SiC Composites with High SiC Reinforcement
Authors: Serhatcan Berk Akçay , Temel Varol , Hüseyin Can Aksa , Onur Güler
Published: 2022 , Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
DOI: 10.35414/akufemubid.1021086
FAVORITE 0 TOTAL DOWNLOAD COUNT 841

0

841

Characterization of Decorative Chrome Coating Layer Applied to Al7075 Alloy
Authors: Sema Ayyıldız , Temel Varol , Gençağa Pürçek
Published: 2021 , International Journal of Pure and Applied Sciences
DOI: 10.29132/ijpas.805360
FAVORITE 0 TOTAL DOWNLOAD COUNT 1304

0

1304

Fabrication and characterization of Cu-Ag bimetal particles by electroless coating method
Authors: Temel Varol , Serhat Akçay , Onur Güler
Published: 2021 , Gümüşhane University Journal of Science and Technology
DOI: 10.17714/gumusfenbil.770725
FAVORITE 0 TOTAL DOWNLOAD COUNT 1158

0

1158

Characterization of Copper-based Materials Fabricated Using Layered Particles
Authors: Temel Varol , Hüseyin Can Aksa , Onur Güler
Published: 2020 , The Black Sea Journal of Sciences
DOI: 10.31466/kfbd.777263
FAVORITE 0 TOTAL DOWNLOAD COUNT 946

0

946

The effect of milling time, milling speed and ball to powder weight ratio on the physical properties of submicron Al2O3 ceramic particles fabricated by mechanical milling method
Authors: Temel Varol
Published: 2018 , Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1749

0

1749

Articles published in
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
El-Cezeri
El-Cezeri
Gümüşhane University Journal of Science and Technology
Gümüşhane University Journal of Science and Technology
International Journal of Pure and Applied Sciences
International Journal of Pure and Applied Sciences
Journal of Polytechnic
Journal of Polytechnic
Karaelmas Science and Engineering Journal
Karaelmas Science and Engineering Journal
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
The Black Sea Journal of Sciences
The Black Sea Journal of Sciences
The International Journal of Materials and Engineering Technology
The International Journal of Materials and Engineering Technology

Reviews

Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Black Sea Journal of Engineering and Science
Black Sea Journal of Engineering and Science
Gazi University Journal of Science
Gazi University Journal of Science
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Gümüşhane University Journal of Science and Technology
Gümüşhane University Journal of Science and Technology
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Uludağ University Journal of The Faculty of Engineering
Uludağ University Journal of The Faculty of Engineering

Publications

A Review on the Surface Treatments Used to Create Wear and Corrosion Resistant Steel Surfaces
Authors: Uğur Temel Yıldız , Temel Varol , Gençağa Pürçek , Serhatcan Berk Akçay
Published: 2024 , Journal of Polytechnic
DOI: 10.2339/politeknik.1001951
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1722

1

0

1722

Selection of natural reinforcement material with multi-criteria decision-making methods for polymer composite materials developed for gun bodies
Authors: Yaşam Kandemir , Temel Varol , Mustafa Aslan
Published: 2023 , Gümüşhane University Journal of Science and Technology
DOI: 10.17714/gumusfenbil.1215620
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 779

2

0

779

Selection of the Most Appropriate Reinforcement Material for Aluminum Matrix Composites by AHP Method
Authors: Temel Varol , Yaşam Kandemir
Published: 2022 , The Black Sea Journal of Sciences
DOI: 10.31466/kfbd.1177161
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 940

1

0

940

Effect of Boron Carbide Reinforcement Amount on the Properties of Boron Carbide Reinforced Al Based Composites
Authors: Serhatcan Berk Akçay , Temel Varol , Onur Güler , Hüseyin Can Aksa
Published: 2022 , El-Cezeri
DOI: 10.31202/ecjse.1023910
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 867

3

0

867

Production and Characterization of Al2024/SiC Composites with High SiC Reinforcement
Authors: Serhatcan Berk Akçay , Temel Varol , Hüseyin Can Aksa , Onur Güler
Published: 2022 , Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
DOI: 10.35414/akufemubid.1021086
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 841

1

0

841

Characterization of Decorative Chrome Coating Layer Applied to Al7075 Alloy
Authors: Sema Ayyıldız , Temel Varol , Gençağa Pürçek
Published: 2021 , International Journal of Pure and Applied Sciences
DOI: 10.29132/ijpas.805360
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1304

2

0

1304

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.