Bu çalışma, Tanalith-E ile emprenye edilen bazi odun türlerinde eğilme direnci ve eğilmede elastiklik modülüne etkilerini belirlemek amacıyla gerçekleştirilmiştir. Ülkemiz orman ürünleri endüstrisinde yaygın olarak kullanılan kayın, meşe, ceviz, kavak, dişbudak ve sarıçam odunlarından TS EN 345 esaslarına uyularak deney örnekleri hazırlanmış ve emprenye işlemi ASTM D 1413-76 esaslarına göre yapılmıştir. Emprenyesiz örneklerin emprenyeli örneklere göre; eğilme direnci değeri kayında %6.83, dişbudakta %5.12, sarıçamda %5.93 olurken; eğilmede elastiklik modülü meşede %7.15, dişbudakta %6.58 olarak tesbit edilmiştir. Tanalith-E ile emprenye edilmiş odun türlerinde eğilme direnci ve eğilmede elastiklik modülü değerleri en yüksek kayın ve dişbudakta, en düşük değerler ise kavak odununda elde edilmiştir.
The aim of this study was to investigate the effects of impregnation with Tanalith-E on the bending strengths and modulus of elasticity in bending of some wood types. The test samples prepared from beech, oak, walnut, poplar, ash and pine wood materials - that are of common use in the forest products industry of TURKEY - according to TS 345, were treated with according to ASTM D 1413-76 substantially. Un-impregnated samples according to impregnated wood materials, the bending strengths in beech to 6.83%, 5.12% in ash, 5.93% in pine, the elasticity module values to 7.15% in oak and ash, at a rate of 6.58% in the higher were found. The highest values of bending strengths and modulus of elasticity in bending were obtained in beech and ash woods impregnated with Tanalith-E, whereas the lowest values were obtained in the poplar wood.
Journal Section | Research Article |
---|---|
Authors | |
Publication Date | May 9, 2016 |
Published in Issue | Year 2016 Volume: 17 Issue: 1 |