Research Article
The investigation of optimization parameters of sodium borate solution treated with different surfactants
Abstract
In this study, the Taguchi method was applied to determine the optimal conditions in the process of changing the antimicrobial activities of sodium borate solution through the addition of commercial surfactants such as cosmocol, NP7, loradac, and tianol 40. The type and ratio of surfactants were used as parameters in an orthogonal array design to reduce the number of experiments during the optimization process. Antimicrobial test results were employed to validate the impact of surfactants on the sodium solution.
Keywords
References
- Novak, M. ve Taylor, W.J. J., Amer. Pharm. Assoc., 1951, 11, 428-429
- Yılmaz, M. T., Minimum inhibitory and minimum bactericidal concentrations of boron compounds against several bacterial strains, Turk J Med Sci, 42, 2: 1423-1429, (2012).
- Tsuyumoto, I., Oshio, T. ve Katayama, K., Preparation of highly concentrated aqueous solution of sodium borate Inorganic Chemistry Communications 10, 20-22 (2007).
- Ingri, N., Equilibrium studies of the polyanions containing BIII, SiIV, GeIV and Vv., Svensk Kem. Tidskr, 75, 199-230, (1963).
- Borokhov, O. ve Schubert, D. (2007). Antimicrobial Properties of Boron Derivatives. In New Biocides Development, American Chemical Society, 967, 412–435, (2007).
- Fei N.C., Mehat N.M. ve Kamaruddin S., Practical applications of Taguchi method for optimization of processing parameters for plastic injection moulding: a retrospective review, ISRN Industrial Engineering, 2013:46217, (2013).
- Dowlatshahi S., An application of design of experiments for optimization of plastic injection molding processes, Journal of Manufacturing Technology Management, 15, 445–54, (2004).
- Farkas K., Hossmann, T., Plattner B. ve Ruf L., NWC: node weight computation in MANETs. 16th International Conference on Computer Communications and Networks, 1059, 64, (2007).
- Rao R.S., Kumar, C.G., Prakasham R.S. ve Hobbs, P.J., The Taguchi methodology as a statistical tool for biotechnological applications: a critical appraisal. Biotechnology Journal, 3, 510, 23, (2008).
- Singh, H. ve Kumar, P., Optimizing cutting force for turned parts by Taguchi’s parameter design approach. The Indian Journal of Engineering and Materials Sciences, 12, 97–103, (2005).
- Kamaruddin, S., Khan Z.A. ve Foong, S.H., Application of Taguchi method in the optimization of injection moulding parameters for manufacturing products from plastic blend, IACSIT International Journal of Engineering and Technology, 2, 574, 80, (2010).
- Mohan, N.S., Ramachandra, A. ve Kulkarni, S.M., Influence of process parameters on cutting force and torque during drilling of glass-fiber polyester reinforced composites. Composite Structures, 71, 407, 13, (2005).
- Ariffin, M., Sapuan, S.M. ve Ismail, N., An optimise drilling process for an aircraft composite structure using design of experiments. Scientific Research and Essays, 1109, 16, (2009).
- Shim, H.J. ve Kim, J.K., Cause of failure and optimization of V-belt pulley considering fatigue life uncertainty in automotive applications. Engineering Failure Analysis, 16, 1955, 63, (2009).
- Mahfouz, A.S., Hassan, A. ve Arisha, A., Practical simulation application: evaluation of process control parameters in Twisted-Pair Cables manufacturing system. Simulation Modelling Practice and Theory, 18, 471, 82, (2010).
- Akbas, H. Ve Kartal, Ç., Yüzey aktif maddelerin yapıları, fonksiyonel özellikleri ve çevreye etkileri XVI. Ulusal Kimya Kongresi, Konya, FK-P11, (2002).
- Roy, R., A primer on the Taguchi Method, Van Nostrand Reinhold, New York. 7,10, 40-55, (1990).
- Asl, M.S., Golmohammadi, F., Kakroudi, M.G. ve Shokouhimehr, M., Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part I:Densification behavior, Ceramics International, 42, 4498–4506, (2016).
Çeşitli yüzey aktif maddelerin ilavesi ile sodyum borat çözeltisinin optimizasyon parametrelerinin incelenmesi
Abstract
Bu çalışmada, Taguchi yöntemi uygulanarak sodyum borat çözeltisinin cosmocol, NP7, loradac ve tianol 40 gibi ticari yüzey aktif maddelerin ilavesi ile antimikrobiyal aktivitelerinin değişimi prosesinde en uygun şartların belirlenmesi amaçlanmıştır. Yüzey aktif türü ve oranı, deneylerin sayısını azaltmak için ortogonal dizi şeklinde uygulanmış optimizasyon sürecinde paramatreler olarak kullanılmıştır. Antimikrobiyal test sonuçları yüzey aktiflerin sodyum çözeltisi üzerine olan etkisini doğrulamak için kullanılmıştır.
References
- Novak, M. ve Taylor, W.J. J., Amer. Pharm. Assoc., 1951, 11, 428-429
- Yılmaz, M. T., Minimum inhibitory and minimum bactericidal concentrations of boron compounds against several bacterial strains, Turk J Med Sci, 42, 2: 1423-1429, (2012).
- Tsuyumoto, I., Oshio, T. ve Katayama, K., Preparation of highly concentrated aqueous solution of sodium borate Inorganic Chemistry Communications 10, 20-22 (2007).
- Ingri, N., Equilibrium studies of the polyanions containing BIII, SiIV, GeIV and Vv., Svensk Kem. Tidskr, 75, 199-230, (1963).
- Borokhov, O. ve Schubert, D. (2007). Antimicrobial Properties of Boron Derivatives. In New Biocides Development, American Chemical Society, 967, 412–435, (2007).
- Fei N.C., Mehat N.M. ve Kamaruddin S., Practical applications of Taguchi method for optimization of processing parameters for plastic injection moulding: a retrospective review, ISRN Industrial Engineering, 2013:46217, (2013).
- Dowlatshahi S., An application of design of experiments for optimization of plastic injection molding processes, Journal of Manufacturing Technology Management, 15, 445–54, (2004).
- Farkas K., Hossmann, T., Plattner B. ve Ruf L., NWC: node weight computation in MANETs. 16th International Conference on Computer Communications and Networks, 1059, 64, (2007).
- Rao R.S., Kumar, C.G., Prakasham R.S. ve Hobbs, P.J., The Taguchi methodology as a statistical tool for biotechnological applications: a critical appraisal. Biotechnology Journal, 3, 510, 23, (2008).
- Singh, H. ve Kumar, P., Optimizing cutting force for turned parts by Taguchi’s parameter design approach. The Indian Journal of Engineering and Materials Sciences, 12, 97–103, (2005).
- Kamaruddin, S., Khan Z.A. ve Foong, S.H., Application of Taguchi method in the optimization of injection moulding parameters for manufacturing products from plastic blend, IACSIT International Journal of Engineering and Technology, 2, 574, 80, (2010).
- Mohan, N.S., Ramachandra, A. ve Kulkarni, S.M., Influence of process parameters on cutting force and torque during drilling of glass-fiber polyester reinforced composites. Composite Structures, 71, 407, 13, (2005).
- Ariffin, M., Sapuan, S.M. ve Ismail, N., An optimise drilling process for an aircraft composite structure using design of experiments. Scientific Research and Essays, 1109, 16, (2009).
- Shim, H.J. ve Kim, J.K., Cause of failure and optimization of V-belt pulley considering fatigue life uncertainty in automotive applications. Engineering Failure Analysis, 16, 1955, 63, (2009).
- Mahfouz, A.S., Hassan, A. ve Arisha, A., Practical simulation application: evaluation of process control parameters in Twisted-Pair Cables manufacturing system. Simulation Modelling Practice and Theory, 18, 471, 82, (2010).
- Akbas, H. Ve Kartal, Ç., Yüzey aktif maddelerin yapıları, fonksiyonel özellikleri ve çevreye etkileri XVI. Ulusal Kimya Kongresi, Konya, FK-P11, (2002).
- Roy, R., A primer on the Taguchi Method, Van Nostrand Reinhold, New York. 7,10, 40-55, (1990).
- Asl, M.S., Golmohammadi, F., Kakroudi, M.G. ve Shokouhimehr, M., Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part I:Densification behavior, Ceramics International, 42, 4498–4506, (2016).
There are 18 citations in total.
Details
| Primary Language | English |
|---|---|
| Subjects | Bioinorganic Chemistry, Inorganic Green Chemistry, Inorganic Chemistry (Other) |
| Journal Section | Research Articles |
| Authors | |
| Early Pub Date | January 16, 2025 |
| Publication Date | January 20, 2025 |
| Submission Date | January 28, 2024 |
| Acceptance Date | November 4, 2024 |
| Published in Issue | Year 2025 Volume: 27 Issue: 1 |