Effect of Annealing Temperature on the Microhardness of Tungsten Carbide Coatings

Mourad Khechba; Beddiaf Zaidi; Chander Shekhar; Maria Plamenova Nikolova

doi:10.26701/ems.339309

Research Article

Effect of Annealing Temperature on the Microhardness of Tungsten Carbide Coatings

Year 2018, , 17 - 19, 20.03.2018

Mourad Khechba Beddiaf Zaidi , Chander Shekhar Maria Plamenova Nikolova

https://doi.org/10.26701/ems.339309

Abstract

Tungsten carbides (WC) coatings have been deposited by RF magnetron
sputtering onto steel substrate (XC70) temperature in the range of 500-1000 °C
under vacuum for 25 minutes. The mechanical properties of WC were investigated
by the measurements of microhardness by Vickers tests. We carried out
microhardness tests with loads varying between 10 g and 1000 g, and the
variations of the microhardness of our samples were followed as a function of
the annealing temperature, the applied load and the penetration depth of the
indenter.

Keywords

Microhardness, WC, steel (XC70), Coating

References

[1] A. Jafari, R. Alipour, M. Ghoranneviss, A. H. Ramezani, J Inorg Organomet Polym 26 (2016) pp 384-393.
[2] L.C. Agudelo-Morimitsu, J. De La Roche, A. Ruden, D. Escobar, E. Restrepo-Parra, Ce-ramics International 40 (2014) pp 7037-7042.
[3] F.M. El-Hossary, N.Z. Negm, Appl. Surf. Sci. 181 (2001) pp 185–190.
[4] E. A. Popova, A. V. Dolmatov, A. V. Kiselev, L. E. Bodrova, S. A. Petrova, E. A. Pas-tukhov, N. A. Vatolin, Russian Metallurgy (Metally) 6 (2006) pp 487–491.
[5] P. Hidnert, Journal of Research of the National Bureau of Standards 18 (1937) pp 47–52.
[6] M. Factor and I. Roman, Surf. Coat. Technol. 132 (2000) pp 181–93.
[7] G. Barbezat, A.R. Nicoll, and A. Sickinger, Wear 162–164 (1993) pp 529–37.
[8] A.S. Kurlov, A.I. Gusev, Inorganic Materials 42 (2006) pp 121–27.
[9] B. Zaidi, M. Khechba, C. Shekhar, I. Saouane, R. Li, Int J Adv Manuf Technol 89 (2017) pp 1837–1840.
[10] P. Chivavibul, M. Watanabe, S. Kuroda, and K. Shinoda, Surf. Coat. Technol. 202 (2007) pp 509–521.
[11] J. Nerz, B. Kushner, and A. Rotolico, J. Thermal Spray Technol. 1 (1992) pp 147–152.

Year 2018, , 17 - 19, 20.03.2018

Mourad Khechba Beddiaf Zaidi , Chander Shekhar Maria Plamenova Nikolova

https://doi.org/10.26701/ems.339309

Abstract

References

[1] A. Jafari, R. Alipour, M. Ghoranneviss, A. H. Ramezani, J Inorg Organomet Polym 26 (2016) pp 384-393.
[2] L.C. Agudelo-Morimitsu, J. De La Roche, A. Ruden, D. Escobar, E. Restrepo-Parra, Ce-ramics International 40 (2014) pp 7037-7042.
[3] F.M. El-Hossary, N.Z. Negm, Appl. Surf. Sci. 181 (2001) pp 185–190.
[4] E. A. Popova, A. V. Dolmatov, A. V. Kiselev, L. E. Bodrova, S. A. Petrova, E. A. Pas-tukhov, N. A. Vatolin, Russian Metallurgy (Metally) 6 (2006) pp 487–491.
[5] P. Hidnert, Journal of Research of the National Bureau of Standards 18 (1937) pp 47–52.
[6] M. Factor and I. Roman, Surf. Coat. Technol. 132 (2000) pp 181–93.
[7] G. Barbezat, A.R. Nicoll, and A. Sickinger, Wear 162–164 (1993) pp 529–37.
[8] A.S. Kurlov, A.I. Gusev, Inorganic Materials 42 (2006) pp 121–27.
[9] B. Zaidi, M. Khechba, C. Shekhar, I. Saouane, R. Li, Int J Adv Manuf Technol 89 (2017) pp 1837–1840.
[10] P. Chivavibul, M. Watanabe, S. Kuroda, and K. Shinoda, Surf. Coat. Technol. 202 (2007) pp 509–521.
[11] J. Nerz, B. Kushner, and A. Rotolico, J. Thermal Spray Technol. 1 (1992) pp 147–152.

There are 11 citations in total.

Details

Subjects	Mechanical Engineering
Journal Section	Research Article
Authors	Mourad Khechba Beddiaf Zaidi Chander Shekhar Maria Plamenova Nikolova
Publication Date	March 20, 2018
Acceptance Date	December 17, 2017
Published in Issue	Year 2018

Cite

APA	Khechba, M., Zaidi, B., Shekhar, C., Nikolova, M. P. (2018). Effect of Annealing Temperature on the Microhardness of Tungsten Carbide Coatings. European Mechanical Science, 2(1), 17-19. https://doi.org/10.26701/ems.339309