Abstract
References
- A. İ. Kaya, T. Dalgarno (2017). Ses Yalıtımı Açısından Doğal Liflerin Akustik Özellikleri. 4. Ulusal Meslek Yüksekokulları Sosyal ve Teknik Bilimler Kongresi, 813-827. A. Hedayati, A. Arefazar (2009). Effects of Filler Characteristics on the Acoustic Absorption of EPDM-based Highly Filled Particulate Composite. Journal of Reinforced Plastics and Composites, 28 (18), 2241-2249. A. Seçgin, Y. İhtiyaroğlu, M. Kara, A. Ozankan (2017). Akustik Yalıtım Malzemelerinin Ses Yutma Katsayılarının Farklı Sıcaklık Koşulları Altındaki Değişiminin Deneysel Olarak İncelenmesi. 18. Ulusal Makina Teorisi Sempozyumu, 317- 324. ASTM-E 1050 (2016). International Standard: Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System, 1-11. ASTM-E 2611 (2006). Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method, 1-14. F. Asdrubali, F. D’Alessandro, S. Schiavoni (2008). Sound Absorbing Properties of Materials Made of Rubber Crumbs. Acoustic’08 Paris, 35-40. H. Harjana, U. Sabino, I. Yahya, R. Kristiani (2014). Sound insulation and absorption properties of re-claimed waste tire rubber. ICAMST2014, 1-5. İ. Batman, İ. Aydın (2012). Taşıtlarda Kullanılan Yalıtım Malzemelerinin Ses Yutma Katsayılarının Belirlenmesi. Journal of the Faculty of Engineering and Architecture of Gazi University, 27 (4), 687-693. J. Sikora, J. Turkiewicz (2010). Sound absorption coefficients of granular materials. Mechanics and Control, 29 (3), 149-157. M. K. El- mansy, Abd-elfattah, A. Mahmoud, M. Abd-elbaseer, R. S. Youssif (2011). Standart uncertainity of material size effect on sound absorption coefficient in reverberation room. Journal of Applied Sciences Research, 7 (2), 166-173. O. Akaydın, A. Akgül, E. Orhon, H. T. Belek (2013). Gürültü Kontrol Elemanlarının Akustik Özelliklerinin Empedans Tüpü ile Belirlenmesi. 10. Ulusal Akustik Kongresi, 1-10. S. Ersoy, A. El-Hafid (2013). Investigation of Sound Properties of High Density Polyethylene/Styrene Butadiene Rubber Polymer Composites. Vibroengineering Procedia, 1, 77-80. Ş. Kılınçarslan, M. Davraz, M. Akça (2018). Pomza Agregalı Köpük Betonların Özelliklerinin Araştırılması. Journal of Engineering Sciences and Design, 6(1), 148-153. TS EN ISO 10534-1 (2004). Akustik-Empedans borularında ses absorplama katsayısı ve empedansın tayini – Bölüm 1: Duran dalga oranını kullanma metodu, 1-24. TS EN ISO 10534-2 (2003). Akustik-Empedans borularındaki ses absorpsiyon katsayısının ve empedansın tayini – Bölüm 2: Aktarım fonksiyonu metodu, 1-25. X. Xu, H. Wang, Y. Sun, J. Han, R. Huang (2018). Sound Absorbing Properties of Perforated Composite Panels of Recycled Rubber, Fiberboard Sawdust, and High-Density Polyethylene. Journal of Cleaner Production, 187, 215-221.
Determining Sound Absorbing and Transmission Loss Properties of Rubbers Used in Automotive Industries
Abstract
Sound
is simply a kind energy which sprawls to environment as waves. Sound changes
pressure at air, water etc. which this detected by ears as sound. At the other
hand noise is a kind of sound which is unpleasant, and undesirable for humans.
In automotive industry, noise effects drivers and passengers comfort directly.
Because of that, automotive manufacturers consider noise insulation in
automobiles as an important factor for quality. Ethylene Propylene Diene
Monomer Rubber (EPDM), Natural Rubber (NR) and Nitrile Rubber (NBR) are one of
the most used insulation materials in automotive industry. In this study, EPDM,
NR and NBR materials sound absorption coefficient and sound transmission loss
are measured with impedance tube for investigate these materials as insulation
part placed between passenger cabin and engine side on shifter mechanisms.
Measurements repeated three times and results showed at graphics. Results are
which obtained from tests are presented systematically in this study. In conclusion,
study
results showed that EPDM is slightly better than NR and NBR as material of
noise insulation part at shifter mechanisms.
Keywords
Sound absorption coefficient Sound transmission loss Sound insulation properties of rubbers
References
- A. İ. Kaya, T. Dalgarno (2017). Ses Yalıtımı Açısından Doğal Liflerin Akustik Özellikleri. 4. Ulusal Meslek Yüksekokulları Sosyal ve Teknik Bilimler Kongresi, 813-827. A. Hedayati, A. Arefazar (2009). Effects of Filler Characteristics on the Acoustic Absorption of EPDM-based Highly Filled Particulate Composite. Journal of Reinforced Plastics and Composites, 28 (18), 2241-2249. A. Seçgin, Y. İhtiyaroğlu, M. Kara, A. Ozankan (2017). Akustik Yalıtım Malzemelerinin Ses Yutma Katsayılarının Farklı Sıcaklık Koşulları Altındaki Değişiminin Deneysel Olarak İncelenmesi. 18. Ulusal Makina Teorisi Sempozyumu, 317- 324. ASTM-E 1050 (2016). International Standard: Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System, 1-11. ASTM-E 2611 (2006). Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method, 1-14. F. Asdrubali, F. D’Alessandro, S. Schiavoni (2008). Sound Absorbing Properties of Materials Made of Rubber Crumbs. Acoustic’08 Paris, 35-40. H. Harjana, U. Sabino, I. Yahya, R. Kristiani (2014). Sound insulation and absorption properties of re-claimed waste tire rubber. ICAMST2014, 1-5. İ. Batman, İ. Aydın (2012). Taşıtlarda Kullanılan Yalıtım Malzemelerinin Ses Yutma Katsayılarının Belirlenmesi. Journal of the Faculty of Engineering and Architecture of Gazi University, 27 (4), 687-693. J. Sikora, J. Turkiewicz (2010). Sound absorption coefficients of granular materials. Mechanics and Control, 29 (3), 149-157. M. K. El- mansy, Abd-elfattah, A. Mahmoud, M. Abd-elbaseer, R. S. Youssif (2011). Standart uncertainity of material size effect on sound absorption coefficient in reverberation room. Journal of Applied Sciences Research, 7 (2), 166-173. O. Akaydın, A. Akgül, E. Orhon, H. T. Belek (2013). Gürültü Kontrol Elemanlarının Akustik Özelliklerinin Empedans Tüpü ile Belirlenmesi. 10. Ulusal Akustik Kongresi, 1-10. S. Ersoy, A. El-Hafid (2013). Investigation of Sound Properties of High Density Polyethylene/Styrene Butadiene Rubber Polymer Composites. Vibroengineering Procedia, 1, 77-80. Ş. Kılınçarslan, M. Davraz, M. Akça (2018). Pomza Agregalı Köpük Betonların Özelliklerinin Araştırılması. Journal of Engineering Sciences and Design, 6(1), 148-153. TS EN ISO 10534-1 (2004). Akustik-Empedans borularında ses absorplama katsayısı ve empedansın tayini – Bölüm 1: Duran dalga oranını kullanma metodu, 1-24. TS EN ISO 10534-2 (2003). Akustik-Empedans borularındaki ses absorpsiyon katsayısının ve empedansın tayini – Bölüm 2: Aktarım fonksiyonu metodu, 1-25. X. Xu, H. Wang, Y. Sun, J. Han, R. Huang (2018). Sound Absorbing Properties of Perforated Composite Panels of Recycled Rubber, Fiberboard Sawdust, and High-Density Polyethylene. Journal of Cleaner Production, 187, 215-221.
Details
| Primary Language | English |
|---|---|
| Subjects | Engineering |
| Journal Section | Articles |
| Authors | |
| Publication Date | December 4, 2018 |
| Published in Issue | Year 2018 Issue: 4 |
