Bu çalışmada dut (Morus alba) ahşabına uygulanmış farklı kat sayılarına ait balmumu katmanlarında elde edilen bazı yüzey özellikleri tespit edilmiş olunup, sonuçlar birbirleri ile karşılaştırılmıştır. Elde edilen veriler bir istatistik programında değerlendirilmiş olunup, genelde farklı sonuçların elde edildiği görülmüştür. ho değeri dışında bütün testler üzerinde varyans analizleri için kat sayısı faktörünün anlamlı olarak bulunduğu görülmüştür. Kat sayısının artması ile L* değerlerinde azalışlar tespit edilirken, b*, C* ve a* değerlerinde artışlar bulunmuştur. Kat sayısının artması ile her iki yönlerde yapılan WI* değerlerinde azalışlar görülmüştür. Renk parametrelerinde en yüksek sonuçlar ho ve L* değerleri için kontrol örneklerinde görülrken, a*, b* ve C* değerleri için 3 kat balmumu uygulanmış deney örnekleri üzerinde bulunmuştur. ∆E* değerleri 1 kat uygulama ile 7.65, 2 kat uygulama ile 9.68 ve 3 kat uygulama ile 12.02 olarak bulunmuştur. 60 ve 85 derecelerde her iki yönelerde yapılan parlaklık değerlerinde artışlar elde edilmiştir. Uygulanan balmumu ile ahşabın sahip olduğu bazı optik özelliklerinin değiştiği görülmüştür.
In this study, the surface properties of mulberry (Morus alba) wood treated with wax layers of varying coat numbers were identified and compared. The obtained data were analyzed in a statistical program, revealing generally different results. Except for the h° value, the number of coats factor was found to be significant for all tests in the variance analyses. As the number of coats increased, decreases were observed in the L* value, while increases were found in the b*, C*, and a* values. Increases in the number of coats resulted in a reduction in WI* values in both directions. The highest results in color parameters were observed in the control samples for ho and L* values, whereas for a*, b*, and C* values, they were found in the experimental samples treated with three coats of wax. The ∆E* values measured were 7.65 for one coat, 9.68 for two coats, and 12.02 for three coats of application. Increases in glossiness values were achieved in both directions at 60 and 85 degrees. The application of wax has been found to change certain optical properties of the wood.
Primary Language | English |
---|---|
Subjects | Chemical Engineering (Other) |
Journal Section | Research Articles |
Authors | |
Publication Date | June 20, 2025 |
Submission Date | July 3, 2024 |
Acceptance Date | November 8, 2024 |
Published in Issue | Year 2025 Volume: 8 Issue: 1 |