Bu araştırmada plastik enjeksiyon, elektrik taahhüt, inşaat, tekstil gibi farklı sektörlerde çalışan özel sektör çalışanlarının radyasyona maruz kalma sıklıkları ile iş sağlığı ve güvenliği konusundaki bilinçleri katılımcıların cinsiyet, yaş, sektör, eğitim durumlarına göre incelemek amaçlanmıştır. Veriler SPSS 25 paket programı kullanılarak geçerlilik, güvenilirlik, frekans dağılımı, aritmetik ortalama, standart sapma, faktör, bağımsız örneklem t testi, Ki-kare, Mann-Whitney U ve Kruskal Wallis testleri ile incelenmiştir. Çıkan sonuçlardan göre İş Sağlığı ve Güvenliği Algı Ölçeği alt boyutlarından Hayata Etkisini Bilme Algısı düzeyinin kadın çalışanlarda Riskleri Bilme Algı düzeylerinin erkek çalışanlarda daha yüksek olduğu görülmüştür. Plastik enjeksiyon sektörü çalışanlarının Kuralları Bilme Algısı düzeyinin diğer sektör çalışanlarından daha yüksek olduğu gözlemlenirken metal işleri sektörü çalışanlarının Riskleri Bilme Algı düzeylerinin diğer sektörlerdeki çalışanlardan daha yüksek olduğu görülmüştür. İş Sağlığı ve Güvenliği Algı Ölçeği alt boyutları için çalışanların yaşlarına bağlı olarak anlamlı bir fark ortaya çıkmazken lise mezunu çalışanlarda İş Sağlığı ve Güvenliği Algı Ölçeği alt boyutlarından Kuralları Bilme Algı düzeyi yüksek çıkmıştır. Bu sonuçlar İş Sağlığı ve Güvenliği bilgilendirme toplantılarına katılımlarının zorunlu hale getirilerek çalışanların bilinçlendirilmesinin sağlanmasının gerektiğini bu şekilde hem kendileri hem etrafındaki diğer çalışanların işteki sağlık ve güvenliklerine olumlu etkileneceğini göstermektedir.
Kruskal-Wallis testi Mann-Whitney U testi İş sağlığı ve güvenliği Radyasyon Radyasyon bilinci.
Bu makale, Umarettin UÇAK tarafından Kenan ŞENTÜRK danışmanlığında hazırlanan "Radyasyon Maruziyeti Frekansı İçerisinde İş Sağlığı ve Güvenliği Algılarının Değerlendirilmesi (Bazı Özel Sektör Çalışanlarına Yönelik Uygulama)" başlıklı yüksek lisans tezinden üretilmiştir.
The frequency of radiation exposure and occupational health and safety awareness of private sector employees working in plastic injection, electrical contracting, construction, and textile sectors were studied according to their gender, age, sector, and education level. The data were examined using the SPSS 25 program with validity, reliability, frequency distribution, arithmetic mean, standard deviation, factor, independent sample t-test, Chi-square, Mann-Whitney U and Kruskal Wallis tests. The perception of knowing the impact on life, one of the sub-dimensions of the Occupational Health and Safety Perception Scale, was found to be higher in female employees but knowing the risks was higher in male employees. The level of perception of knowing the rules in plastic injection sector employees was higher but knowing the risks in metal works sector employees was higher than the others. The age of the employees didn’t affect the sub-dimensions of the Occupational Health and Safety Perception Scale but the level of perception of knowing the rules was found to be high among high school graduates. Outcomes say that the employees must be forced to participate in Occupational Health and Safety meetings so that both their own health and safety at work and that of other employees around them will benefit.
Kruskal-Wallis test Mann-Whitney U test Occupational health and safety Radiation Radiation awareness.
This article was produced from the master's thesis titled " Evaluation of Occupational Health And Safety Perceptions Within the Frequency of Radiation Exposure (Application for Some Private Sector Employees)” prepared by Umarettin UÇAK under the supervision of Kenan ŞENTÜRK. In order to conduct the study, approval was received from the Ethics Committee of T.R. Istanbul Gelisim University at 05.05.2021 with the decision number 2021-16-15. The study group was informed about the purpose of the research and their consent was obtained.
Primary Language | English |
---|---|
Subjects | Health and Ecological Risk Assessment, Occupational Health and Safety in Mines |
Journal Section | Research Articles |
Authors | |
Publication Date | June 27, 2025 |
Submission Date | January 13, 2025 |
Acceptance Date | May 27, 2025 |
Published in Issue | Year 2025 Volume: 13 Issue: 2 |