An Investigation of Base Plate Connections of a Steel Industrial Building Having Different Column Cross-Sections
Abstract
In this study, steel column base plate connections of a steel industrial building that are one of the
most important connection regions were studied. Two dimensional static analysis of a steel
industrial building was performed and exposed column base plate dimensions were determined
according to American Institute of Steel Construction Code-LRFD (Load and Resistance Factor
Design) method. The effects of selected steel column cross section types on the behaviour of
column base plate connections were investigated by using RFEM finite element analysis program.
For this purpose, finite element analysis of three types of column base plate connection models
were performed and evaluated comparatively. From results, the best value for top column lateral
displacement was obtained in W column section-base plate connection and the best behaviour for
Von Mises stresses values was obtained in square hollow section column. The undesired behaviour
was determined in circular hollow section column-base plate connection type.
References
- CSI. SAP2000.V-15. "Integrated finite element analysis and design of structures basic analysis reference manual". Berkeley (CA. USA): Computers and Structures Inc. Dlubal-company (2015). RFEM 5.05 Tiefenbach, Germany.
- Fisher J.M., Kloiber L.A., (2010). "AISC steel design guide 1:,base plate and anchor rod design". United States of America, American Institute of Steel Construction. Hussein, P.S.H., (2015). Analytical investigation of column base plates used insteel structures, MSc thesis, Selcuk University, Konya (in Turkish).
- Kingsley A.M., (2005). "Experimental and analytical investigation of embedded column base connections for concrete filled high strength steel tubes", MSc Thesis, University of Washington, Seattle, W.A.
- Lee D-Y, Goel S.C., Stojadinovic B., (2008). "Exposed column-base plate connections bending about weak axis: I". Experimental study International Journal of Steel Structures, Vol. 8, pp. 11-27.
- Roşca V-E, Teleman E-C, Axinte E, Băetu G, (2013). "Design of steel column base connections for large eccentricities", Bulletin of the Polytechnic Institute of Iasi-Construction & Architecture Section, Vol. 63, No. 6, pp. 137-149.
- Shafieifar M, Khonsari S, (2012). "Studying the behaviour of base plates with high degree of rigidity". 15th WCEE 24-8, Lisbon, Portugal, 8 p.
- Stamatopoulos G, Ermopoulos JC, (2011). "Experimental and analytical investigation of steel column bases". Journal of constructional steel research,Vol. 67, No. 9, pp. 1341-1357.
- Yavuz, G., Hussein, P.S.H., (2015). Designing the Column Base Plate of a Steel Industrial Building according to AISC-LRFD Method. International Journal of Natural and Engineering Sciences, Vol. 9, No. 2, pp. 7-16.
Abstract
References
- CSI. SAP2000.V-15. "Integrated finite element analysis and design of structures basic analysis reference manual". Berkeley (CA. USA): Computers and Structures Inc. Dlubal-company (2015). RFEM 5.05 Tiefenbach, Germany.
- Fisher J.M., Kloiber L.A., (2010). "AISC steel design guide 1:,base plate and anchor rod design". United States of America, American Institute of Steel Construction. Hussein, P.S.H., (2015). Analytical investigation of column base plates used insteel structures, MSc thesis, Selcuk University, Konya (in Turkish).
- Kingsley A.M., (2005). "Experimental and analytical investigation of embedded column base connections for concrete filled high strength steel tubes", MSc Thesis, University of Washington, Seattle, W.A.
- Lee D-Y, Goel S.C., Stojadinovic B., (2008). "Exposed column-base plate connections bending about weak axis: I". Experimental study International Journal of Steel Structures, Vol. 8, pp. 11-27.
- Roşca V-E, Teleman E-C, Axinte E, Băetu G, (2013). "Design of steel column base connections for large eccentricities", Bulletin of the Polytechnic Institute of Iasi-Construction & Architecture Section, Vol. 63, No. 6, pp. 137-149.
- Shafieifar M, Khonsari S, (2012). "Studying the behaviour of base plates with high degree of rigidity". 15th WCEE 24-8, Lisbon, Portugal, 8 p.
- Stamatopoulos G, Ermopoulos JC, (2011). "Experimental and analytical investigation of steel column bases". Journal of constructional steel research,Vol. 67, No. 9, pp. 1341-1357.
- Yavuz, G., Hussein, P.S.H., (2015). Designing the Column Base Plate of a Steel Industrial Building according to AISC-LRFD Method. International Journal of Natural and Engineering Sciences, Vol. 9, No. 2, pp. 7-16.
Details
| Primary Language | English |
|---|---|
| Subjects | Civil Engineering |
| Journal Section | 4 |
| Authors | |
| Publication Date | May 17, 2019 |
| Submission Date | November 1, 2018 |
| Published in Issue | Year 2019 Volume: 4 Issue: 2 |
We welcome all your submissions
All published work is licensed under a Creative Commons Attribution 4.0 International License Link . Creative Commons License
NESciences.com © 2015