Araştırma Makalesi
BibTex RIS Kaynak Göster

Yıl 2017, , 1442 - 1452, 19.09.2017

Ram Subash Maurya

https://doi.org/10.18186/journal-of-thermal-engineering.338901
Cited By: 3

Öz

Kaynakça

  • [1] Tu, C.V. and D.H. Wood, Wall pressure and shear stress measurements beneath an impinging jet, Experimental Thermal and Fluid Science, 1996. 13: p. 364-373.
  • [2] Shi, Y.L., M.B. Ray and A.S. Mujumdar, Computational study of impingement heat transfer under a turbulence slot jet, Industrial and Engineering Chemistry Research, 2002, 41: p. 4643-4651.
  • [3] De Langhe, B. Merci, and E. Dick, Application of RG hybrid RANS/LES model to swirling confined turbulent jets, Journal of Turbulence, 2006. 7(56): p. 1-19.
  • [4] Perrotin, T. and D. Clodic, Thermal-hydraulic CFD study in louvered fin and flat tube heat exchangers, International Journal of Refrigeration, 2004. 27(4): p. 422-432.
  • [5] Ozden, E. and I. Tari, Shell side CFD analysis of a small shell and tube heat exchanger, Energy Conversion and Management, 2010. 51(5): p. 1004-1014.
  • [6] Badra, J. A.R. Masri, and M. Behnia, Enhanced heat transfer from arrays of jets impinging on a moving plates, Heat Transfer Engineering, 2013, 34(4): p. 361-371.
  • [7] Karlsson T. and L. Vamling, Flow fields in shell and tube condensers: comparison of a pure refrigerant and a binary mixture, International Journal of Refrigeration, 2005. 28(5): p. 706-713.
  • [8] Al-Anizi, S.S. and A.M. Al-Otaibi, Double perforated impingement plate in shell and tube heat exchanger, 7th International Conference on Heat Exchanger Fouling and Cleaning- Challenges and Opportunities. 2007. Tomar, Portugal.
  • [9] Kandu B, Semi analytical methods for heat and fluid flow between two parallel plates, Journal of Thermal Engineering, 2015, 1(3): p. 175-181.

NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER

Yıl 2017, , 1442 - 1452, 19.09.2017

Ram Subash Maurya

https://doi.org/10.18186/journal-of-thermal-engineering.338901
Cited By: 3

Öz

The impingement plate is an important protecting device of tube bank
which is located on shell side at the nozzle inlet of shell and tube heat
exchanger. Current work presents a 2D numerical investigation of the flow
structure developing around different impingement plate design under different
flow conditions using ANSYS Fluent. Location, size and arrangement of
impingement plate are the investigated parameters which provides significant
information for the selection of ideal location and size of required
impingement plate.  Study compares different
plate geometry and concludes the best one which apart from protecting the tube
banks, also removes the stagnation zone developing behind them because of their
placements.

Anahtar Kelimeler

Impingement Plate Heat Exchanger Flow Distribution TEMA CFD Numerical Simulation

Kaynakça

  • [1] Tu, C.V. and D.H. Wood, Wall pressure and shear stress measurements beneath an impinging jet, Experimental Thermal and Fluid Science, 1996. 13: p. 364-373.
  • [2] Shi, Y.L., M.B. Ray and A.S. Mujumdar, Computational study of impingement heat transfer under a turbulence slot jet, Industrial and Engineering Chemistry Research, 2002, 41: p. 4643-4651.
  • [3] De Langhe, B. Merci, and E. Dick, Application of RG hybrid RANS/LES model to swirling confined turbulent jets, Journal of Turbulence, 2006. 7(56): p. 1-19.
  • [4] Perrotin, T. and D. Clodic, Thermal-hydraulic CFD study in louvered fin and flat tube heat exchangers, International Journal of Refrigeration, 2004. 27(4): p. 422-432.
  • [5] Ozden, E. and I. Tari, Shell side CFD analysis of a small shell and tube heat exchanger, Energy Conversion and Management, 2010. 51(5): p. 1004-1014.
  • [6] Badra, J. A.R. Masri, and M. Behnia, Enhanced heat transfer from arrays of jets impinging on a moving plates, Heat Transfer Engineering, 2013, 34(4): p. 361-371.
  • [7] Karlsson T. and L. Vamling, Flow fields in shell and tube condensers: comparison of a pure refrigerant and a binary mixture, International Journal of Refrigeration, 2005. 28(5): p. 706-713.
  • [8] Al-Anizi, S.S. and A.M. Al-Otaibi, Double perforated impingement plate in shell and tube heat exchanger, 7th International Conference on Heat Exchanger Fouling and Cleaning- Challenges and Opportunities. 2007. Tomar, Portugal.
  • [9] Kandu B, Semi analytical methods for heat and fluid flow between two parallel plates, Journal of Thermal Engineering, 2015, 1(3): p. 175-181.
Toplam 9 adet kaynakça vardır.

Ayrıntılar

Bölüm Makaleler
Yazarlar

Ram Subash Maurya

Yayımlanma Tarihi 19 Eylül 2017
Gönderilme Tarihi 19 Eylül 2017
Yayımlandığı Sayı Yıl 2017

Kaynak Göster

APA Maurya, R. S. (2017). NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER. Journal of Thermal Engineering, 3(5), 1442-1452. https://doi.org/10.18186/journal-of-thermal-engineering.338901
AMA Maurya RS. NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER. Journal of Thermal Engineering. Ekim 2017;3(5):1442-1452. doi:10.18186/journal-of-thermal-engineering.338901
Chicago Maurya, Ram Subash. “NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER”. Journal of Thermal Engineering 3, sy. 5 (Ekim 2017): 1442-52. https://doi.org/10.18186/journal-of-thermal-engineering.338901.
EndNote Maurya RS (01 Ekim 2017) NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER. Journal of Thermal Engineering 3 5 1442–1452.
IEEE R. S. Maurya, “NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER”, Journal of Thermal Engineering, c. 3, sy. 5, ss. 1442–1452, 2017, doi: 10.18186/journal-of-thermal-engineering.338901.
ISNAD Maurya, Ram Subash. “NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER”. Journal of Thermal Engineering 3/5 (Ekim 2017), 1442-1452. https://doi.org/10.18186/journal-of-thermal-engineering.338901.
JAMA Maurya RS. NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER. Journal of Thermal Engineering. 2017;3:1442–1452.
MLA Maurya, Ram Subash. “NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER”. Journal of Thermal Engineering, c. 3, sy. 5, 2017, ss. 1442-5, doi:10.18186/journal-of-thermal-engineering.338901.
Vancouver Maurya RS. NUMERICAL INESTIGATION OF ISOTHERMAL FLOW AROUND IMPINGEMENT PLATES IN A SHELL AND TUBE EXCHANGER. Journal of Thermal Engineering. 2017;3(5):1442-5.

Cited By

METHOD OF INDIRECT DETERMINATION OF THERMAL LOAD PARAMETER
Journal of Thermal Engineering
Yurii Baidak
https://doi.org/10.18186/thermal.532158
HEAT TRANSFER AND FRICTION CHARACTERISTICS OF AN ARRAY OF PERFORATED FINS UNDER LAMINAR FORCED CONVECTION
Journal of Thermal Engineering
Afshin Ahmadi Nodooshan
https://doi.org/10.18186/thermal.540007
Experimental study of a stand-alone earth to air heat exchanger for heating and cooling in arid regions
Journal of Thermal Engineering
N. SAKHRI
https://doi.org/10.18186/thermal.978023

IMPORTANT NOTE: JOURNAL SUBMISSION LINK http://eds.yildiz.edu.tr/journal-of-thermal-engineering